We Review the Best 9mm Pistol Caliber Carbines on the Market

Just what is a carbine? Carbines are shortened versions of full-length rifles. They shoot the same ammunition as rifles while some others fire lower-powered ammunition. Carbines include the types designed for pistols as well.

A 9mm carbine uses 9mm cartridge. The 9mm Luger has become popular among firearms these days especially for small, compact carry guns intended for self-defense. The 9mm cartridge is a potent cartridge for its size. It also provides good performance with well-designed bullets.

If you are a newbie to the firearm department, you will be confused between the carbine and a rifle. It is not surprising since there are many similarities and differences between these two which requires constant practice and learning to differentiate these two.

The main difference though between these two will be namely the barrel length and the weight. A carbine comes with a shorter barrel and lighter weight.

Hence, check out this review to choose the best 9mm caliber carbine for your needs.

Top 10 9mm Pistol Caliber Carbines

Name of productWeightCapacityBarrel lengthLengthPrice
CZ Scorpion EVO 3 S1 Carbine with Muzzle Brake6.4 lbs.20+116.2"26-36"$$
SIG Sauer® MPX Semiautomatic Tactical Rifle7.6 lbs.30+116"28.5-33"$$$
Hi-Point Firearms 995TS Semi Auto Carbine 9mm 16.5" Barrel Blued 10 Rounds Polymer Skeleton Stock Black 995TS6.25 lbs.1016.5"31"$
SIG SAUER - MPX CARBINE 16IN 9MM BLACK 30+1RD7 lbs.30+116"32.8"$$$
CZ USA - SCORPION EVO 3 S1 CARBINE FAUX SUPPRESSOR 16.2IN 9MM 20+1RD brownells7 lbs.20+116.2"34.75"$$
Just Right Carbine Takedown Semi Auto Rifle 9mm Luger 17" Barrel 17 Rounds Tube Style Forend Black6.5 lbs.1717"31"-34.25"$$
Century International Arms Centurion UC-9 Semi Auto Carbine 9mm Luger 16" Barrel 32 Rounds Folding Steel Stock RI-1658X9 lbs.3216"31.5"$$
Chiappa M1-9 Carbine Semi Auto Rifle 9mm Luger 18" Barrel Synthetic Stock Matte Blued 500.1376.25 lbs.1018"35"$
Beretta CX4 Storm Carbine Semi Auto Rifle 9mm Luger 16.6" Barrel 15 Rounds Synthetic Thumbhole Stock Matte Black JX49220M5.75 lbs.1516.6"29.7"$$

CZ Scorpion EVO 3 S1 Carbine with Muzzle Brake

CZ Scorpion EVO 3 S1 Carbine with Muzzle Brake

The first best 9mm carbine would be the CZ Scorpion EVO. The 9mm carbine features a carbine-length barrel with muzzle brake along with an adjustable, folding stock for a perfect fit. Meanwhile, the rugged polymer frame has M-LOK attachment points to allow a wide range of customization.

The CZ’s Scorpion EVO 3 S1 Carbine delivers quick-handling performance as the simple ambidextrous controls makes use of both left- and right-handed shooters. Also, charging handle offer was easy as well. Regarding the sights, the low-profile aluminum sights can be adjusted for windage and elevation.

Furthermore, there are multiple aperture sizes in order to let you zero in on close- and long-range targets. The carbine-length barrel provides increased velocity when compared over to a handgun. This is because the length of the barrel and a muzzle brake plays an important role to cut down on recoil and muzzle jump which hinders the velocity.

The double-stack polymer magazine shoots lights out when co-witnessed with Holosun hs503gu. The ejection patterns are strong and consistent as well. I admit that the trigger is on the heavy side and similar to an AR trigger feel. This will indirectly limit the rate at which you can fire.

Although it does come in over 7lbs when fully loaded, the rifle is well balanced. You might face several problems with the safety digging into your finger but you can easily fix this issue. You would just have to search for “safety delete evo scorpion”. After doing so, you will find the part required and articles/videos for installing the fix.

If you wish to remove your carbine’s cross bolt safety, a safety delete is the correct choice. Although it might cost a little, on the long run you can avoid injuring your hand after every shot. It will provide a more comfortable shooting experience as well.

The mags are a bit stiff to get out but I suspect that it is not an error on the manufacturer’s part. I am more in the opinion that the reason being likely is because it’s just still fairly new. To fix this issue, you basically do just a small short kick because the recoil recoil is non-existent.

Keeping the muzzle on point for quick follow ups is done great by the muzzle break. As a side note, buy your 9 ammo a lot because it will be easy to eat through 9mm very fast with this fun to shoot rifle.

So far, I have managed to put about 500 rounds. During those rounds, I have not had a single ftf or fte. I also did not experience a single jam or failure. With a muzzle break, the blow back gun keeps the fumes away from you effectively.

Since the mags are plastic, they are inexpensive. The rails are easy to be accessorized with any upgrades you may want. Nonetheless, the trigger has no take-up but is a little heavy so you would just have to increase your pull until it goes off.

Suitable for:

  • Home defense
  • Target shooting
  • At the range

SIG Sauer® MPX Semiautomatic Tactical Carbine

SIG Sauer® MPX Semiautomatic Tactical Carbine

The second on the list of best 9mm carbine would be the SIG Sauer. The SIG Sauer features an adjustable barrel length and stock configuration in the field. Meanwhile, the gas-operated piston system provides low recoil and reduced fouling.

The fully closed and locked rotating bolt system ensures maximum safety and the SIG Sauer’s MPX can be adapted to almost any personal preference. Also, the gas-operated short-stroke piston system provides the last-round hold open. This feature helps you to do instant verification of an empty magazine.

In the event of an obstructed bore, the locked rotating bolt system will provide maximum safety. The ambidextrous selector, charging handle, bolt release and magazine release are all the familiar AR-style controls included in this best 9mm carbine.

In case you are going to add several accessories on this 9mm carbine, the rear- mounted charging handle will ensure that it won’t obstruct the rail-mounted accessories. The rear also includes an Aluminum KeyMod handguard.

The caliber uses 9mm Luger and the barrel length is 16 inches. The capacity is 30+1. The finishing is Matte Black Hard-Coat Anodized and the stock is collapsible. The twist rate is 1:10 which means that in one revolution, the rifling will spin the bullet in 10 inches.

The total length would be around 28.5 – 33 inches and weighs 7.6 pounds. I like the shorter KeyMod handguard and I’m glad to have the longer rail. However, the equipped ghost ring sights make for slow target acquisition.

Also, the cheek weld on the steel rod needs more improvement to be made. Due to the strong spring in mag, initially I had trouble to get rounds to feed with a new magazine. Nonetheless, after beating it up for a while it turned out OK.

As a tip, I would suggest loading maybe 25 rounds until it breaks in after pushing the magazine in hard. The magazines are expensive though so bear that in mind. Furthermore, the design of this 9mm carbine appears to be a mixture of an AR-15 and an MP5.

To prove my point, you can look into the upper/lower receiver design, control placement and the general order of operations. If you combine these features with a short magazine and collapsible stock from an MP5, you would have a general idea on what the Sig Sauer MPX looks like.

The gas-operated carbine has comparatively low-intensity 9mm round. The gas piston system regulates gas valve to enable the carbine to theoretically run all weights of projectiles. Ranging from full-tilt +P loads to target subsonic ammo, it should go without a hitch.

The keymod attachment points with a slick groove setup interfaces into the upper receiver. The innovative free-floating rail is completely removable with no tools required. It should also enable the use of a suppressor which is an added advantage since many shooter prefer running them with a suppressor.

Overall in this best 9mm carbine review, this Sig Sauer MPX comes ready to rumble once you add your accessories.

Suitable for:

  • Accuracy

Hi-Point Firearms Semi Auto 9mm Carbine

Hi-Point Firearms Semi Auto 9mm Carbine

Placing third in the list of best 9mm carbine reviews would be the Hi-Point 995TS. The Hi-Point Carbine is a rugged firearm that features a solid 4140 steel barrel. There is also a receiver with an integral top Picatinny rail mount equipped along.

The Hi-Point Carbine includes a polymer skeleton stock which provides more choices in ergonomics to the shooter. The heat dissipating forend will eliminate any excessive heat from sustained fire. The ergonomic of the firearm is lightweight and comfortable to handle with easy operation.

The 100% American made firearm is a semi auto 9mm carbine that has 16.5″ barrel with 10 rounds. It is +P rated which means it could handle +P ammunition. The higher pressure +P defensive ammunition will be an advantage if you find yourself in the situation of having to use the carbine to defend your life.

The integral Picatinny top rail mount has adjustable sights equipped with thumb safety. The advantage of the thumb safety is that it is easy to manipulate and helps to prevent accidental discharge of the weapon. However, always keep in mind whenever you release the safety to avoid being in a bad situation which might endanger your life.

The overall is 31″ and weighs 6.25 lbs. The capacity is 10+1 and the stock is Matte Black Polymer. The equipped sights are fully-adjustable. While the 995TS may not be the sexiest 9mm carbine on the market, the innovative and sleek build is still quite intimidating.

The unique all-weather, black polymer skeletonized stock not only enhances comfort and handling but also helps keep its weight manageable. Meanwhile, the adjustable peep sight system is good news for anyone looking for something more sophisticated. Ghost-ring rear peep and post front sights are included as well.

This Hi-Point best 9mm carbine also features swivel, sling, and scope mounts in addition to its multiple Picatinny rails. When I tested the 9mm carbine’s performance, I noticed that the solid build and internal recoil buffer designed in the 995TS provides solid control and a somewhat natural feel.

Furthermore, the 995TS incorporates an ergonomic grip-mounted mag release. The slide is designed to lock open after firing the last round. You might understand how foolish we will look if we keep pulling the trigger when we have already run through the mag several pulls ago.

When compared to your average carbine, this may be a bit heavier due to its direct blowback action as well as lack of a locked-breech. Although the Hi-Point’s carbines are heavy enough as it is, you can’t resist not accessorizing them.

Overall in this Hi-Point best 9mm carbine review, I recommend this 9mm carbine for all types of shooters regardless whether they are experienced or otherwise considering its user-friendliness and solid accuracy.

Suitable for:

  • Hunters
  • Law enforcement agents
  • Recreational shooters
  • Those looking to boost home security

SIG SAUER – MPX 9mm Pistol

SIG SAUER - MPX 9mm Pistol

Next best 9mm pistol caliber carbine would be the Sig sauer MPX. The 9mm carbine uses 9 mm Luger cartridge with 30+1-round capacity including the one in the chamber. The barrel length is 16″ and has black finish.

The total length would be 32.8″ and is included with a new level of operator safety. The unconventional design feature redefines the submachine gun category and has in-field adaptability to top it off with proven reliability in the harshest environments.

The gas operated 9mm carbine has removable magazine and flip up front sight and rear sight. A 1 x 30-round magazine is included while the muzzle is plain. So far, I have used this carbine for the range but I am planning to broaden its sport use later on.

The collapsible stock is pretty nice but it is kind of rough to get a proper cheek weld in order to obtain a proper sight picture. Stock material is Polymer and weighs 7lbs.

One of the rare features in the Sig carbine is the fully ambidextrous MPX’s controls including the magazine release, charging handle, and bolt stop.

One push on the forward takedown pin will unlock the rail making it free to slide forward and off the gun. Using set screws in some fashion or another, the AR type handguard rails are clamped to the barrel nut.

The MPX’s system is slick and clean and there is no need for an extra hardware. It is solid enough to mount a sighting system. The sights’ point of impact remained unaffected as I myself reinstalled several times between magazines.

The collapsible metal-framed stock retracted fully to the back of the receiver making it for a total of three positions including having an intermediate length and a fully-extended length as well.

The MPX also comes in much shorter and alternate configurations, some of which you’d need tax stamps for. For further information on other MPX setups, you can visit their MPX site.

The rumor is that the MPX platform is made to be modular, with easy-to-change barrel/bolt setups, so one can swap the 9mm barrel out for a higher-horsepower .40 S&W or .357 Sig setup.  I didn’t test this personally, but it makes sense, with the increasing demand for modularity in the firearms world today.

I only had the Sig Sauer MPX for a couple of quick range visits, so like I said, I can’t give you a full, various products EPIC20 code colorado veteran 400x250strong overview of the system, with multiple different loads including handloads, across a spectrum of distances.

I was able to run three different loads through the MPX: Federal American Eagle 115 grain FMJ, PMC “Bronze” 115 grain JHP, and Sig Sauer’s own Elite V-Crown 124 grain JHP, the defense round I use in my carry guns.

Suitable for:

  • Competitive Shooting
  • Self Defense
  • Tactical
  • Target Practice



Opening the crisp brown box from CZ, I was pretty excited at the chance to put some rounds through the faux-suppressor, folding-buttstock-equipped version of the CZ Scorpion—the EVO 3 S1 Carbine.

This gun is a remarkably soft shooting, 9mm blowback, semi-auto, polymer version of a submachine gun. The Scorpion has a 16.2” cold hammer forged barrel with it’s muzzle threaded 1/2” x 28 TPI and is offered from CZ with either a compensating muzzle brake or a faux suppressor built specifically for CZ-USA by SilencerCo.

For those who love to run suppressed, this gun is ready to go! If you are still waiting for your BATFE paperwork to clear, the place-holder SilencerCo faux suppressor serves to aesthetically complete the gun before you’re able to hit the mute button for real.

Functionally, the difference in these two variants is entirely aesthetic—both shoot beautifully and with surprising accuracy. Both models come equipped with a folding adjustable stock and ambidextrous controls, and their non-reciprocating charging handles are swappable, making these carbine a southpaw shooters dream.

Not only was the Scorpion intuitive and accurate to shoot, lightweight and affordably priced, it was definitely a conversation starter at the range!

Being chambered in 9mm means an affordable gun to train with, even at pistol-only rated ranges, and is easily upgraded for home defense with self-defense ammo—I tried 147-gr. Federal HST, which it has no trouble feeding.

At the end of the day, the best home and self-defense gun is the one you are most proficient with under stress, and for a lot of gun owners, a 9mm-chambered carbine may be just the ticket. First impressions are always important, and the Scorpion did not disappoint.

For a lightweight polymer gun weighing less than 7 lbs., it doesn’t have the toy-like feel like of so many of its peers in the market. I give credit to CZ’s well-proportioned design and overall balance for that win! If you are expecting to experience a relatively soft shooting AR-esque carbine, prepare to be happily underwhelmed. Recoil? It was there, but barely.

If you love ghost-ring irons you are going to love what you see when you bring this gun on target! Similar to the HK MP5, the Scorpion’s charging handle does not reciprocate and is engaged by a straight pull back and an upward push to lock in place on the left side of the receiver.

Unlike the MP5, the Scorpion’s bolt locks back on the last round. To load, simply insert magazine and give the charging handle a solid downward smack and you’re good to go. This alone increases the fun-factor of shooting the Scorpion by a multiple of 10!

To test the Scorpion’s downrange precision at 25 yards, an Aimpoint Micro H2 red-dot optic was mounted to the top rail. Working through a variety of hollowpoint and ball ammunition from Black Hills, Hornady, Federal and Winchester, the CZ carbine proved itself easily capable of 1.5-inch or less 5-shot groups.

Its best group of the day came with the Black Hills’ 124-gr. JHP load, printing an impressive 0.84-inch cluster. Tough to complain about that! Reliability was also 100-percent, with no malfunctions whatsoever.

Suitable for:

  • Reliability

Just Right Carbine Takedown Rifle 9mm Luger

Just Right Carbine Takedown Rifle 9mm Luger 

In its cold, black heart, the JR carbine is a pistol caliber (9mm for this test) carbine loosely built on the general design of the very popular AR platform. However, the JR shucked the gas impingement system for a much simpler blowback design.

This allowed the guys at JR to give the gun ambidextrous bolt and ejection options. In addition, you can swap out barrels and bolt assemblies to switch calibers. And looking at the product specs, you can tell the designers were bitten hard at some point by somebody using proprietary technology.

Users can deploy standard AR furniture and trigger components… all while using Glock or 1911 mags. Add that to the threaded barrel that’s suppressor-ready and you have a platform that will actually complement your collection instead of adding another dimension of accessories and headaches.

The JR is obviously built to a very high standard. I was hard pressed to find any machine marks, defects or mis-alignments in the entire platform. The barrel and receiver finishes were defect free and managed to handle being thrown around the truck without too much fuss.

The top rail happily accepted an EOTech sight and the whole rig is without rattles or any of that “cheap” feeling that can sometimes come from new-to-the-market manufacturers.

I’m giving four stars because the bolt internals aren’t chromed and started to look a little dingy as time and cheap 9mm ammo took their toll. Another small item is the use of Phillips head screws on the ejection port blockoff plate. Seriously? Phillips button head screws? Those need to be upgraded to Allen heads ASAP. As you can tell, I’m really looking for things to ding the JR on here.

I was shocked to discover how involved the field stripping process. First, you have to remove the shoulder thing that goes up, and then remove three Allen screws to separate the upper from the lower. At that point the bolt, buffer and spring fall out.

If you are truly serious about cleaning, you’ll remove those aforementioned Phillips screws on the ejection port cover and scrub everything down. And you’ll need to. The JR will get dirty. This disassembly process is a little worrisome.

From a metallurgy standpoint, using finely threaded Allen screws in an application like retention of the upper has potential for heartache. If you don’t ever clean your gun, disregard this portion of the review.

The bolt does not stay open after the last round is fired. You must manually retract it and push the bolt handle downward into the “hold open” position.  This is of no moment for the recreational shooter.  If you were in a self-defense shooting scenario the chances that you would need reload would be fairly slim.

Your 17, 33 or 50 round magazine would have probably provided all the firepower you need. I am not saying that I would not want an extra magazine I am just proffering that if I needed to reload then I am really in the wrong place at the wrong time.

Century International Arms Centurion Pistols

Century International Arms Centurion Pistols

Like its fully automatic cousin, the UC-9 is a blowback operated firearm, meaning gases from fired rounds are sent directly back to the bolt. Cycling speed being controlled by only its mass and the recoil spread.

Just like other blowback operated firearms the action may be difficult for smaller individuals to charge and could result in unnecessary recoil.

The former can post a problem for those lacking upper body strength, while the latter is a non-issue due to the combination of the UC-9’s tremendous weight and the light-kicking 9mm para cartridge.For those looking for a simpler, and—just as important—less expensive means of obtaining a fine, semi-automatic facsimile of an Uzi, Century International Arms has a good solution.

The company’s Centurion UC-9 Carbine is virtually indistinguishable from a real Uzi at first glance, save the elongated barrel required to meet the 16-inch minimum for a readily transferable rifle. Best of all, you’ll save about 90 percent of the cost, as this carbine retails for less than a grand.

The UC-9 has the iconic under-folding stock, grip safety, winged cocking knob, knurled barrel-retaining nut, stamped receiver and polymer handguard, all of which help provide its Uzi-esque looks.

The sights are similar to, but not an exact replica of, IMI’s Model A variants, with the front sight being adjustable for windage and elevation and the rear sight consisting of an L-shaped dual aperture marked for 100 and 200 yards, respectively.

The exterior is where the similarities between the UC-9 and an Uzi end, however, as modifications are needed to ensure the UC-9 cannot fire or be made to fire on fully automatic. For one thing, the UC-9’s bolt is much, much lighter than an Uzi bolt.

This ensures the added weight resulting from an extra 6 inches of barrel is not overwhelming. Moreover, the heavy bolt on a selective-fire model helps maintain controllability and reliability during fully automatic fire, elements not required in a semi-automatic firearm.

In terms of operation, the UC-9 is also different from an Uzi in that the former fires from a closed bolt while the submachine gun fires from an open bolt. An open-bolt semi-auto is about as useful as a fore-grip on a muzzleloader, so dispensing with this system was a no-brainer.

In addition to the recoil spring attached to the bolt assembly, the UC-9 has a striker assembly with an additional recoil spring. This makes it more complicated to field-strip than an Uzi, but is a good solution to ensure it cannot go full auto and to allow it to fire from a closed bolt.

The exterior is where the similarities between the UC-9 and an Uzi end, however, as modifications are needed to ensure the UC-9 cannot fire or be made to fire on fully automatic. For one thing, the UC-9’s bolt is much, much lighter than an Uzi bolt.

This ensures the added weight resulting from an extra 6 inches of barrel is not overwhelming. Moreover, the heavy bolt on a selective-fire model helps maintain controllability and reliability during fully automatic fire, elements not required in a semi-automatic firearm.

Chiappa M1-9 Carbine Semi Auto Firearm

Chiappa M1-9 Carbine Semi Auto Firearm

Chiappa’s M1-9 Carbine is by no stretch of the imagination an actual down to the bayonet lug replica of the M1 Carbine. In fact, the one I picked up has a black polymer stock and is chambered in 9mm but the basic shape and inspiration is there and shooting 9mm is a lot cheaper than .30 Carbine.

Taking it out of the box was a little underwhelming of course since I didn’t get that woodsy, cosmoline smell but it does look pretty cool and is very light at 5.8 pounds unloaded. It came with two 10 round magazines which apparently are compatible with Beretta Model 92 pistols. This makes sense since both are made in Italy… I plan on picking up some 15 and 20 rounders to extend the shooting fun.

Again, visually from a glance it looks just like an M1 Carbine…almost… On closer inspection, the bayonet lug is part of a plastic sleeve around the barrel and wouldn’t support a butter knife for any serious close in work… the stock is again black polymer but Chiappa also has a wooden version of it.

The magazine well is designed for the aforementioned Beretta mags and the safety is in the same place as the M1 Carbine and is the late model rotating type rather than the push button which is fine because the magazine release is next to it as well.

The rear sight is also a late model ramp style peep sight with the same gradients and adjustments for windage but unlike the original it can be removed and a red-dot optic mounted. The rail however is not a standard picatinny but the smaller, thinner dovetail style that you would find on a .22. The front sight is a standard blade post with curved wings protecting it.

There is a sling mount on the left side and the stock has the M1 Carbine standard cut out that would allow you to mount a sling on the not included M1 Carbine oiler bottle.

Finally, unlike the original the bolt is a straight blow back. Additionally, the operating rod doesn’t have the same functionality as the M1 Carbine but is just added mass, presumable to prevent the bolt from beating itself to pieces and unlike the original can be seen on both sides and the part of the plastic stock where the op rod is located looked like it was roughly cut out as an afterthought.

Well, despite (because?) of all of that I liked the overall look and feel of it and couldn’t wait to get it out on the range. The manual suggested a break in period of 150-200 rounds of ball ammo so I loaded up with some 115 grain Aquila and headed off.

Let me tell you. This thing is fun to shoot. I like pistol caliber rifles. Even Hi-Point carbines are fun because the recoil and noise is low compared to an AR or other “real” battle rifle. I could shoot the Chiapp M1-9 all day long and unlike the Hi-Point it doesn’t feel cheap when shooting it. Just a smooth shot, easy recoil and quick recovery.

Beretta CX4 Storm Carbine 9mm

Beretta CX4 Storm Carbine 9mm

Looking at the Storm, you know it comes from the land that gives us the Ferrari. Even the post 1989 ban bridge that runs from the pistol grip to midway of the butt stock is graceful and looks right. It is graceful and easy on the eye and touch.

No sharp corners or odd bits sticking out to snag, poke, or get in the way. The fit of the components and the color of the finish, polymer, and steel are perfect. It would look good hanging from the shoulder of a lady in her little black dress out on the town.

This is one of the slickest feeling firearms I own. You can run your hand over the gun and get only one snag–the one you want, the charging handle. The balance lies between the pistol grip and the butt making it fast and stable to shoulder and track your target.

The shoulder stock in height and length gives me perfect sight alignment on the iron sights. The magazine fits in the pistol grip like a third generation Subgun. The safety and mag release are just like a model 92. They are also rounded and snag free but are easy to manipulate.

The adjustable flip up sights are recessed in wings that are just the right size to protect them and not obscure a good sight picture. There is one accessory rail under the forend that, when not needed, stores in the stock. You access it by pushing in on the front sling swivel and pulling it out.

There are spacers for the buttstock to change the length about two inches. The cocking handle and the ejection port cover can be swapped for right or left handed use. The magazine feeds from the pistol grip. My carbine is a PX4 that uses the P92 magazines.

The barrel is hammer forged and chrome lined. The Berretta CX4 Storm carbine is available in the three major pistol calibers: 9mm,.40S&W, and .45ACP.

For those who wish to put any of the many popular accessories like lasers, lights, or red dots on the gun, there are rails available. I added a top rail for a red dot and a side rail. Also there are magazine adapters that allow the use of both P92/96 and Storm magazines, including 20 rounders.

The Cx4 isn’t fully ambidextrous, but most of the controls are reversible. From the factory, the Cx4 is set up for right-handed operation, including right handed ejection. In about five minutes (or less with practice), the operator can reverse the extractor and ejector, the safety (1), the magazine release (2), the cocking handle (3), and the ejection port cover (4) for left handed use. The only control that is not reversible is the bolt release lever.

The fixed thumbhole stock can be adjusted in length via the use of up to three 15mm (.6 inch) spacers. In my opinion, pretty much every thumbhole stock sucks on a tactical rifle. However, the Beretta Cx4 is not nearly as bad as others I have tried.  In fact, it is about as good as one might expect, given the political limitations Beretta was faced with.

Key Considerations when choosing a 9mm Pistol Caliber Carbine:

  1. Weight
  2. Length
  3. Capacity
  4. Barrel length
  5. Price


If you are looking for the best 9mm carbine for your everyday carry, you may prefer a lightweight 9mm carbine over a heavier one as it could be carried around. A heavy 9mm carbine could influence the accuracy of the shot and comfortableness as well.


Generally, a high capacity firearm is defined when it is capable of holding more than 10 rounds for handguns. There are several exceptions though depending on the firearm. A 10+1 round capacity means that the magazine will hold ten while +1 represents the one pre-loaded on the barrel.

Barrel length

A longer barrel length have provides more accuracy at long ranges because you will get more velocity from the same cartridge. On the other hand, a shorter barrel has the advantage of a lighter shotgun and will be more maneuverable. Plus, it will be easily stored and concealed.


Determining the precise length of your best 9mm carbine can help you to purchase a case for it if you need one.


I hope this best 9mm carbine review has been helpful for you to choose the best 9mm carbine. Hopefully, these reviews have been a reliable guideline for your needs. There are many products recommended in this review, so I hope you will think it thoroughly to make the best choice.